Nouveau
Amplificateur 2 cannaux
Ce produit n'est plus en stock
Date de disponibilité: 0000-00-00
Amplificateur d&b D6
Amplificateur 2 cannaux
Destinataire :
* Champs requis
OU Annuler
Commandes et voyants | |
---|---|
POWER | Mains power switch |
SCROLL/EDIT | Digital rotary encoder |
Affichage | Liquid Crystal Display (LCD)/120 x 32 pixel |
ISP, GR, OVL A/B | LED indicators |
Traitement numérique du signal | |
---|---|
Égaliseur | 4-band PEQ/Notch |
Latence des entrées analogiques et numériques | 0.3 msec. |
Réglage du délai | 0.3 - 340 msec with 0.1 msec detents |
Configurations | current d&b loudspeakers and linear mode except 2-Way Active, V-Series and B2-SUB |
Commutateurs de fonction | d&b loudspeaker specific circuits |
Générateur de fréquence | Pink noise or Sine wave |
Taux d'échantillonnage | 96 kHz/27 Bit ADC/24 Bit DAC |
Connecteurs | |
---|---|
ENTRÉE ANALOG (A1, A2) | 3 pin XLR female |
REPIQUAGE ANALOGIQUE (A1,A2) | 3 pin XLR male |
ENTRÉE NUMÉRIQUE (D1, D2) | 3 pin XLR female AES 3 |
REPIQUAGE NUMÉRIQUE (Sortie) | 3 pin XLR male |
Taux d'échantillonnage | 48 kHz/96 kHz |
Échantillonnage numérique AES/EBU | 48 kHz/96 kHz |
CANAL DE SORTIE A/B | NL4 |
À DISTANCE | 2 x RJ 45 parallel, CAN-Bus |
SERVICE | USB type B |
Connecteur secteur | powerCON® |
Données (paramètre linéaire avec filtre subsonique) | |
---|---|
Puissance de sortie maximale par canal (THD + N < 0.5%, all channels driven) CF = 6 dB at 4 / 8 ohms CF = 12 dB at 4 / 8 ohms |
2 x 600/350 W 2 x 600/350 W |
Rapport S/N (non pondéré, RMS) | > 110 dBr |
Alimentation électrique | |
---|---|
Type | Autosensing switch mode power supply with active Power Factor Correction (PFC) |
Tension nominale gamme haute | 208 - 240 V, 50 - 60 Hz |
Tension nominale gamme basse | 100 - 127 V, 50 - 60 Hz |
Dimensions, poids | |
---|---|
Dimensions (H x L x P) | 2 RU x 19" x 353 mm/13.9" |
Poids | 8 kg/17.6 lb |