Nouveau
Amplificateur 4 cannaux
Ce produit n'est plus en stock
Date de disponibilité: 0000-00-00
Amplificateur d&b D80
Amplificateur 4 cannaux
Destinataire :
* Champs requis
OU Annuler
Commandes et voyants | |
---|---|
POWER | Mains power switch |
SCROLL/EDIT | Digital rotary encoder |
Affichage | Colour TFT touchscreen, 3.5"/320 x 240 pixel |
ISP, GR, OVL A/B | Colour TFT |
Traitement numérique du signal | |
---|---|
Égaliseur | 2 x 16-band PEQ/notch/shelving/asymmetric |
Latence des entrées analogiques et numériques | 0.3 msec. |
Réglage du délai | 0.3 - 10000 msec. |
Configurations | current d&b loudspeakers and linear mode |
Commutateurs de fonction | d&b loudspeaker specific circuits |
Générateur de fréquence | Pink noise or Sine wave |
Taux d'échantillonnage | 96 kHz/27 Bit ADC/24 Bit DAC |
Connecteurs | |
---|---|
ENTRÉE ANALOG (A1 - A4) | 3 pin XLR female |
REPIQUAGE ANALOGIQUE (A1,A4) | 3 pin XLR male |
ENTRÉE NUMÉRIQUE (D1/2, D3/4) | 3 pin XLR female AES 3 |
REPIQUAGE NUMÉRIQUE (Sortie) | 3 pin XLR male |
Échantillonnage numérique AES/EBU | 48 kHz/96 kHz |
Sorties enceintes A/B/C/D | NL4, optional EP5 |
Sortie 4 canaux | NL8 |
CAN | 2 x RJ 45 parallel |
ETHERNET | 2 x etherCON®, 10/100 Mbit Ethernet |
Connecteur secteur | powerCON®-HC |
Données (paramètre linéaire avec filtre subsonique) | |
---|---|
Puissance de sortie maximale par canal (THD + N < 0.5%, all channels driven) CF = 6 dB at 4 / 8 ohms CF = 12 dB at 4 / 8 ohms |
4 x 2600/2000 W 4 x 4000/2000 W |
Rapport S/N (non pondéré, RMS) Entrée analog Entrée numérique |
- > 114 dBr |
Alimentation électrique | |
---|---|
Type | Autosensing switch mode power supply with active Power Factor Correction (PFC) |
Tension nominale gamme haute | 208 - 240 V, 50 - 60 Hz |
Tension nominale gamme basse | 100 - 127 V, 50 - 60 Hz |
Dimensions, poids | |
---|---|
Dimensions (H x L x P) | 2 RU x 19" x 530.5 mm/20.9" |
Poids | 19 kg/42 lb |